Cyrix-Li-ct 12/24V-230A combiner


The Cyrix-Li-ct 12/24V-230A combiner simplifies the aggregation of multiple lithium battery banks in 12V or 24V systems, featuring a high current rating of 230A. It enables efficient and streamlined battery bank connection for enhanced energy management.

SKU: CYR010230412 Category:


Victron Cyrix-Li-ct 12/24V-230A intelligent Li-ion battery combiner

Microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged). Cyrix Battery Combiners are an excellent replacement for diode isolators.

The LiFePO4 battery: preventing cell under voltage, over voltage and over temperature
The first line of protection is cell balancing. All Victron LiFePO4 batteries have integrated cell balancing. The second line of protection consists of:

shut down of the load in case of imminent cell under voltage, and
shut down or reduction of the charging current in case of imminent cell over voltage, high temperature (>50°C) or low temperature (<0°C). The VE.Bus BMS is the core of the second protection line. However, not all loads or chargers can be controlled directly by the VE.Bus BMS. In order to shut down such loads or chargers several VE.Bus BMS controllable Cyrix switches are available. Cyrix-Li-ct The functionality of the Cyrix-Li-ct is analogous to the Cyrix-ct. The Cyrix-Li-ct will parallel connect a lead acid starter battery and a LiFePO4 battery: if the Charge Disconnect output of the VE.Bus BMS is high, and if it senses 13,4V (resp. 26,8V) or more on one of its power terminals. The Cyrix will disengage immediately: when its control output becomes free floating, signalling cell over voltage or cell over temperature, and/or when battery voltage drops below 13,2V. Start assist function: a short positive pulse will close the relay during 30 seconds A built-in transient voltage suppressor will limit the voltage spike that may occur when the Cyrix suddenly disengages due to cell overvoltage or over temperature.

Additional information

Weight 0.27 kg
Dimensions 50 × 100 × 65 cm