BatteryProtect 12/24V-100A


With a higher capacity of 100A, the BatteryProtect 12/24V-100A offers enhanced protection for batteries in 12V or 24V systems. Its intelligent monitoring and control features prevent damage from over-discharge, over-voltage, and short circuits, ensuring the reliability and durability of your electrical setup.

SKU: BPR000100400 Category: Tag:


Victron BatteryProtect 12/24V-100A
With 7-segment LEDdisplay: easy to set up

The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
The BatteryProtect is not designed for reverse currents from charging sources.

12/24V auto ranging
The BatteryProtect automatically detects system voltage

Programming made easy
The BatteryProtect can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen.

A special setting for Li-ion batteries
In this mode the BatteryProtect can be controlled by the VE.Bus BMS.
Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual.

Ultra low current consumption
This is important in case of Li-ion batteries, especially after low voltage shutdown.Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.

Over voltage protection
To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.

Ignition proof
No relays but MOSFET switches, and therefore no sparks.

Additional information

Weight 0.6 kg
Dimensions 115 × 42 × 59 cm